If you’re considering a roof replacement and are wanting to know, “What is included in roof replacement?”, the job usually covers removing the old roofing, inspecting and repairing damaged decking, installing underlayment and new roofing materials, addressing flashing and ventilation, cleaning up debris, and inspecting the completed roof. The exact work depends on the condition of your home and whether you’re installing shingles, tile, metal, or another roofing system.
For homeowners in Oakland Park, a roof replacement also needs to account for South Florida conditions. Heavy rain, strong sun, humidity, and hurricane-season weather put roofs through a lot over the years. Knowing what happens during replacement makes it easier to understand your estimate and recognize where your money is going.
What Is Included in Roof Replacements?
Most roof replacements follow the same general process, but no two homes are exactly alike. Roof size and pitch matter, as does the material being removed. The condition of the wood underneath can also change the scope of the project once the old roof comes off.
In most cases, the job covers tear-off, inspection of the decking, preparation of the roof surface, installation of the new roofing system, flashing and ventilation work where needed, cleanup, and a final inspection.
If you’re trying to plan around the project, Total Roofing’s guide to the complete roof replacement timeline in Florida offers more information about what happens between the initial estimate and the completed roof.
It Starts With Removing the Old Roof
The first major part of a roof replacement is tear-off. Crews remove the existing shingles, tile, metal, or other material so they can see the roof structure underneath.
This is important because some problems simply cannot be seen from the ground. A roof might have a few worn areas on the surface but relatively sound decking underneath. Another roof may look acceptable from the street while hiding moisture damage from an older leak.
Removing the existing material allows the crew to see what they’re working with before covering the roof again.
Before tear-off begins, the area around the home is generally prepared for debris. Homeowners can make the process easier by moving vehicles, patio furniture, grills, toys, potted plants, and other belongings away from the house.
Weather matters here, too. An exposed roof needs to stay protected from moisture, which is why scheduling can shift when South Florida storms are in the forecast. Total Roofing goes into this issue further in its article about whether a roof can be replaced in the rain.
The Roof Deck Gets a Closer Look
Once the old material has been removed, the decking is exposed. This is the wood surface that supports the roofing system above it.
The crew can now look for soft areas, rot, moisture damage, holes, loose panels, or other deterioration. Areas around valleys, vents, chimneys, and previous leaks may deserve extra attention.
Roof inspections frequently uncover problems that homeowners did not know were there. Missing or damaged roofing, flashing failures, poor ventilation, and moisture beneath the surface are among the issues that may be found during an inspection.
Learn more about common roofing problems here: The Most Common Roofing Problems Found During Roof Inspections
Does a Roof Replacement Include New Decking?
A full replacement does not automatically mean all of the roof decking needs to come out.
If the existing wood is still in good condition, it may remain. Damaged sections can be removed and replaced before installation continues. Because the full condition of the decking may not be visible until tear-off, additional repairs can sometimes affect the final cost.
Ask how decking replacement is handled before work begins. Some roofing estimates account for a certain amount of decking work, while others price additional sheets separately.
This is also one reason roof replacement prices can vary considerably from house to house. Material choice, roof size, labor, and repairs underneath the old roof can all affect the bill.
For a closer look at those expenses, read Breaking Down the Cost to Replace a Roof: Labor, Materials, and More.
Underlayment Goes Down Before the Finished Roof
After the decking is ready, the protective layers beneath the finished roof can be installed.
Underlayment sits between the decking and the exterior roofing material. It provides another barrier against moisture if rain manages to get beneath shingles, tile, or metal.
Certain areas may require additional attention because they’re more prone to water intrusion. Roof valleys, eaves, skylights, chimneys, vents, and other penetrations are common examples.
These layers aren’t as noticeable as the finished roof, but they’re an important part of how the entire system handles rain. That’s particularly relevant in Oakland Park, where a sunny afternoon can turn into a heavy downpour quickly.
Flashing Needs Attention, Too
Flashing is another part of the roof that tends to go unnoticed until something goes wrong.
It is used around places where the roof changes direction, meets another surface, or has an opening. You’ll commonly find it around chimneys, skylights, plumbing vents, walls, and valleys.
During replacement, existing flashing should be evaluated to determine whether it can remain or needs to be replaced. Putting a new roof over damaged or poorly installed flashing can leave an obvious place for water to enter.
If you’ve dealt with a leak before, tell your roofer where you’ve seen water. Even when the stain inside the house seems minor, the source of the leak may be somewhere else on the roof. Total Roofing’s article on how to repair roof leaks safely and effectively explains why finding the actual source of roof leaks can be more complicated than it appears.
Choosing and Installing the New Roofing Material
With the deck prepared and protective materials installed, the new roof can go on.
Total Roofing works with residential roofing systems including asphalt shingles, tile, and metal. The installation process varies depending on which one you choose.
An asphalt shingle roof typically uses starter shingles along designated edges, field shingles across most of the roof, and caps along hips and ridges. Tile and metal roofs have their own installation requirements.
If you’re deciding between two common choices for a Florida home, Total Roofing’s metal roof vs. asphalt shingles comparison looks at how each performs in Florida conditions.
What Changes With a Metal Roof Replacement?
A metal roof replacement has its own installation process. The roof has to be properly prepared for the metal system, and details such as panel alignment, flashing, fastener placement, and normal expansion and contraction need to be considered.
There are also several types of metal roofing to choose from. Homeowners considering this route can read more about metal roofing or compare options in Total Roofing’s guide to the best metal roof materials for Florida homes.
Roof Ventilation Is Part of the Bigger Picture
A new roof is also a good time to look at the home’s ventilation.
Roof and attic ventilation help control heat and moisture. Depending on the house, the system may include soffit vents, ridge vents, box vents, or another setup.
More ventilation is not automatically better. Intake and exhaust need to work together, which is why the home’s existing setup should be considered when the roof is replaced.
If vents are removed during tear-off, ask how they will be handled when the new roofing material goes on.
Are Gutters, Skylights, and Fascia Included?
This is where reading the estimate closely becomes important.
Roof replacement does not necessarily include every component that touches the roof. Gutters, skylights, fascia, soffit, and chimney repairs may be separate from the basic roofing price.
For example, the flashing around an existing skylight might need attention even if you’re keeping the skylight itself. Deteriorated fascia discovered after the old roofing is removed may also require additional repairs.
If the damage is relatively limited, you may not need a complete replacement at all. Total Roofing’s guide to repairing just a section of a roof explains when localized repairs may still make sense and when broader roofing problems can point toward replacement.
Cleanup Comes Before the Crew Leaves
Tearing off a roof creates a lot of debris. Old roofing material, nails, fasteners, underlayment, scraps, and packaging all have to go somewhere.
Roofing crews typically remove debris as the job progresses and complete a larger cleanup once installation is finished. That may include clearing the driveway and areas around the home and using magnetic tools to pick up stray nails.
It is still a good idea to watch where you step around the property for the first few days, especially in grass, mulch, gravel, and landscaping where small pieces can be difficult to spot.
The Final Roof Inspection
The last shingle, tile, or metal panel going into place doesn’t necessarily mean the job is over.
The completed roof should be checked for proper installation, including flashing, vents, roof penetrations, ridge and hip areas, fasteners, and other details. The property should also be checked to make sure debris has been removed.
Depending on the work being performed and applicable local requirements, permitting and inspections may also be part of the process.
The final check is worth taking seriously. A small installation issue is easier to address before the crew leaves than after the next round of South Florida rain.
Read Your Roof Replacement Estimate Carefully
Not every roofing estimate includes the same work. One quote may look less expensive because certain materials or potential repairs aren’t included.
Instead of comparing only the bottom-line price, look at what each contractor plans to do. The estimate should explain the roofing material, tear-off, underlayment, decking repairs, flashing, ventilation, disposal, cleanup, warranties, and how unexpected repairs will be handled.
Before signing, ask:
- Is the old roofing being completely removed?
- How are damaged sections of decking priced?
- What happens to existing flashing and vents?
- Are cleanup, disposal, and required permits included?
- What warranties come with the roof?
You don’t need to know every technical detail of roofing installation. You should know what you’re paying for and what could potentially change the price once the old roof comes off.
Know What You’re Getting Before Roof Replacement Begins
A new roof is much more than the material you see from the street. The decking, moisture barriers, flashing, ventilation, installation details, cleanup, and inspection all play a role in the finished job.
For an Oakland Park homeowner, those details are especially important. A roof has to deal with intense sun, humidity, heavy rain, and severe weather year after year. Taking the time to understand the scope of the project can help you compare estimates and choose the right approach for your home.
If your roof is showing signs of age or you’re unsure whether another repair will be enough, contact Total Roofing to schedule an inspection for your Oakland Park home and discuss your roof replacement options.